BW Gas Alert MicroClip Multi-Gas Detector

The smallest, lightest, most rugged multi-gas detector made. The revolutionary Gas Alert Micro Clip offers full-function multi-gas instrument performance, with the simplicity and ease-of-use of a Gas Alert Clip Extreme.

The unit is Rugged, ultra-compact (4.2 x 2.4 x 1.4 in / 10.7 x 6.0 x 3.6 cm) and lightweight (5.6 oz. / 160 g) It is easy to use, with simple one-button operation and integrated durable, stainless steel alligator clip. The integral concussion-proof boot makes the Gas Alert Micro Clip perfect for the most rugged environments.

Included with every unit is Standard datalogger features (16 hours) and event-logger (10 events). See the option IR (infra-red) connectivity kit to get the data into your PC for reporting.

The continuous LCD shows simultaneous gas concentrations for H2S,CO, O2, and combustibles (0-100% LEL or 0-5.0% Methane) Alarming provides 95 dB alarm tone and bright wide-angled alarm bars and has an internal vibrating alarm for high noise areas. LCD Backlight: in alarm (auto) and on demand reactivation.

Four alarm levels: Instant Low and High Alarm for all gases; TWA (time weighted average) and STEL (short term exposure limit) for H2S, CO; OL (over limit alarm) Powered by a lithium polymer battery (run-time typically 14 hours; recharge in less than 3 hours)

Comes with optional vehicle charger and convenient confined space kits too.

Supported Gases:

H2S - hydrogen sulfide	O2 - oxygen
CO - carbon monoxide	LEL combustibles

Full Review

The GasAlertMicroClip is housed in a rugged, highly water resistant IP66/67 housing with built-in concussion-proof boot. Other features include an extra-loud audible alarm, flashing LED light bars and built-in vibrating alarm.

• Rugged, ultra-compact (4.2 x 2.4 x 1.4 in / 10.7 x 6.0 x 3.6 cm) and lightweight (5.6 oz. / 160 g)
• Simple one-button operation
• Standard datalogger (16 hours) and eventlogger (10 events)
• Durable, stainless steel alligator clip
• Integral concussion-proof boot for the most rugged environments
• Continuous LCD shows simultaneous gas concentrations for H2S,CO, O2, and combustibles (0-100% LEL or 0-5.0% Methane)
• Powered by a lithium polymer battery (run-time typically 14 hours;recharge in less than 3 hours)
• Provides 95 dB alarm tone and bright wide-angled alarm bars
• Equipped with internal vibrating alarm for high noise areas
• Backlight: in alarm (auto) and on demand reactivation
• Four alarm levels: Instant Low and High Alarm for all gases; TWA (time weighted average) and STEL (short term exposure limit) for H2S, CO; OL (over limit alarm)
• Simple automatic calibration procedure
• Fully compatible with BW's MicroDock II automatic test and calibration system
• Records TWA, STEL and maximum exposures to gas and displays readings on command
• User selectable options include: confi dence beep, latching alarm, calibration due date, bump due date, "SAFE" display function, multi-language, span concentration values, combustible sensor measurement selection (0-100%LEL or 0-5.0% v/v methane) and stealth mode
• Full function self-test of: sensor, battery, circuitry and audible/visual/vibration alarms
• Delivered ready for use with sensors, lithium polymer battey, stainless steel alligator belt clip, calibration hose/cap and instructions

Gas :	H2S	CO	O2	Combustibles
Measuring Range :	0-100 ppm	0-500 ppm	0-25.0%	0-100% LEL or 0-5% by vol. methane

Auto zero	Yes
Calibration	Automatic
Backlight	Low light (auto); alarm condition (auto); reactivation on demand
Full function self-test	Sensor integrity, circuitry and battery; audible/visual alarms
Sensor	Plug-in, electrochemical cell (toxic and oxygen); catalytic (LEL)
User field options	Confidence beep, pass code protection, latching alarms, calibration due date, “SAFE” display function
ALARM INDICATORS	Clearly advises alarm levels both visually and audibly
Visual alarms	Two flashing alarm bars visable from all angles
LCD indicates gas present and alarm levels encountered
Audible alarm	Typically 95 dB at 30 cm variable pulsed audible alarm
Vibrator alarm	Pulses warning in gas alarm conditions, or for any status alarms
Other	Low battery, over range, multiple gas and missing sensor
ALARM LEVELS	Instantaneous Low Alarm for all gases; instantaneous High Alarm for all gases;
	TWA (time weighted average) and STEL (short term exposure limit) for H2S and/or CO; OL (over limit alarm) for combustible gases
LCD	Continuous, alphanumeric gas readout and status display advises:
Gases monitored	H2S, CO, O2, combustibles (0-100% LEL or 0-5.0% methane)
Gas concentration	Simultaneous and continuously displays gas concentration(s) present (in ppm, %LEL, or % v/v)
TWA ppm or %	Records STEL and TWA exposures and displays on demand
Peak ppm or %	Records and displays peak exposure to gas and displays on demand
Alarm setpoints	Displayed on activation
TESTS:
Full function self-test	Full function self-test on activation
Battery	Continuous
GENERAL SPECIFICATIONS	Rugged, composite material with integral concussion-proof boot
Operating temperature	-4 to 122 oF / -20 to 50 oC
Humidity	5% to 95% RH (non-condensing)
EMI/RFI	Complies with EMC Directive 89/336/EEC
Ingress Protection	IP65
Battery run-time	16-18 hours on two AA alkaline cells / 14-16 hours on two NiMH rechargeable cells
Size	2.4 x 4 x 1.3 in. / 6 x 10 x 3.3 cm
Weight	7.4 oz. / 211 g
WARRANTY	Full 2 year warranty including all sensors
DATALOGGER OPTIONS	User-downloadable datalogger
Data recorder	All events and occurrences
Sampling rate	Factory set at 5-second intervals and user-settable from 1 to 127-second intervals
Storage	4.4 months of continuous data via 32 MB Flash MMC card (64 MB cards are also available); when full, the wraparound feature replaces oldest data with most recent data

Gas Detector Management Made Easy

The GasAlertMicroClip Soft Tools application is required to configure the GasAlertMicroClip gas detector.


Soft Tools is used to:
- define all of the settings for the sensors
- set the user options
- save settings in a file that can be transferred to additional detectors
- download data and event logs
- retrieve settings from a detector that can be used to configure
additional detectors
- initiate calibrations and bump checks, and
- upgrade firmware

Note: The IR Link is compatible only with Windows 2000 and Windows XP

Product brochures

En español

Product price lists

Technical training

Product manuals