BW Gas Alert Micro Clip Confined Space Kit

The Gas Alert Micro Clip Confined Space Kit includes a four gas GasAlertMicroClip detector plus all the essential accessories you'll need to keep the gas monitor in service. Ordering the gas detector in a confined space kit ensures that you have all the important accessories you need bundled together in a convenient durable carry case, plus you save money in the process!

This kit includes the following:

• Gas Alert Micro Clip gas detector (see below for configuration)
• Calibration gas
• Flow regulator
• Hoses & tubes
• Manual aspirator pump
• Durable carry case
• Instruction manual
• Training CD

The monitor in this kit comes configured as a four gas unit with sensors for LEL (combustible gases, like methane, propane, natural gas, etc), oxygen O2, hydrogen sulfide H2S and carbon monoxide CO. Alternative configurations are available in confined space kits as well - to order either call us toll free or visit the main Gas Alert Micro Clip configuration page, configure your detector. Be sure to add the 'confined space kit' accessory and a suitable calibration gas to complete your kit if you order through this method.  (This product however does include these parts.)


What's Included:

• GasAlertMicroClip Detector;
• IR Connectivity Kit for data downloading and instrument setup;
• Remote sampling kit with 10ft./3m sample tubing and probe;
• Manual aspirator pump;
• Calibration gas;
• Regulator;
• Fittings; and
• Hardsided, foam-lined carrying case

Full Review

The GasAlertMicroClip is housed in a rugged, highly water resistant IP66/67 housing with built-in concussion-proof boot. Other features include an extra-loud audible alarm, flashing LED light bars and built-in vibrating alarm.

• Rugged, ultra-compact (4.2 x 2.4 x 1.4 in / 10.7 x 6.0 x 3.6 cm) and lightweight (5.6 oz. / 160 g)
• Simple one-button operation
• Standard datalogger (16 hours) and eventlogger (10 events)
• Durable, stainless steel alligator clip
• Integral concussion-proof boot for the most rugged environments
• Continuous LCD shows simultaneous gas concentrations for H2S,CO, O2, and combustibles (0-100% LEL or 0-5.0% Methane)
• Powered by a lithium polymer battery (run-time typically 14 hours;recharge in less than 3 hours)
• Provides 95 dB alarm tone and bright wide-angled alarm bars
• Equipped with internal vibrating alarm for high noise areas
• Backlight: in alarm (auto) and on demand reactivation
• Four alarm levels: Instant Low and High Alarm for all gases; TWA (time weighted average) and STEL (short term exposure limit) for H2S, CO; OL (over limit alarm)
• Simple automatic calibration procedure
• Fully compatible with BW's MicroDock II automatic test and calibration system
• Records TWA, STEL and maximum exposures to gas and displays readings on command
• User selectable options include: confi dence beep, latching alarm, calibration due date, bump due date, "SAFE" display function, multi-language, span concentration values, combustible sensor measurement selection (0-100%LEL or 0-5.0% v/v methane) and stealth mode
• Full function self-test of: sensor, battery, circuitry and audible/visual/vibration alarms
• Delivered ready for use with sensors, lithium polymer battey, stainless steel alligator belt clip, calibration hose/cap and instructions

Gas :	H2S	CO	O2	Combustibles
Measuring Range :	0-100 ppm	0-500 ppm	0-25.0%	0-100% LEL or 0-5% by vol. methane

Auto zero	Yes
Calibration	Automatic
Backlight	Low light (auto); alarm condition (auto); reactivation on demand
Full function self-test	Sensor integrity, circuitry and battery; audible/visual alarms
Sensor	Plug-in, electrochemical cell (toxic and oxygen); catalytic (LEL)
User field options	Confidence beep, pass code protection, latching alarms, calibration due date, “SAFE” display function
ALARM INDICATORS	Clearly advises alarm levels both visually and audibly
Visual alarms	Two flashing alarm bars visable from all angles
LCD indicates gas present and alarm levels encountered
Audible alarm	Typically 95 dB at 30 cm variable pulsed audible alarm
Vibrator alarm	Pulses warning in gas alarm conditions, or for any status alarms
Other	Low battery, over range, multiple gas and missing sensor
ALARM LEVELS	Instantaneous Low Alarm for all gases; instantaneous High Alarm for all gases;
	TWA (time weighted average) and STEL (short term exposure limit) for H2S and/or CO; OL (over limit alarm) for combustible gases
LCD	Continuous, alphanumeric gas readout and status display advises:
Gases monitored	H2S, CO, O2, combustibles (0-100% LEL or 0-5.0% methane)
Gas concentration	Simultaneous and continuously displays gas concentration(s) present (in ppm, %LEL, or % v/v)
TWA ppm or %	Records STEL and TWA exposures and displays on demand
Peak ppm or %	Records and displays peak exposure to gas and displays on demand
Alarm setpoints	Displayed on activation
TESTS:
Full function self-test	Full function self-test on activation
Battery	Continuous
GENERAL SPECIFICATIONS	Rugged, composite material with integral concussion-proof boot
Operating temperature	-4 to 122 oF / -20 to 50 oC
Humidity	5% to 95% RH (non-condensing)
EMI/RFI	Complies with EMC Directive 89/336/EEC
Ingress Protection	IP65
Battery run-time	16-18 hours on two AA alkaline cells / 14-16 hours on two NiMH rechargeable cells
Size	2.4 x 4 x 1.3 in. / 6 x 10 x 3.3 cm
Weight	7.4 oz. / 211 g
WARRANTY	Full 2 year warranty including all sensors
DATALOGGER OPTIONS	User-downloadable datalogger
Data recorder	All events and occurrences
Sampling rate	Factory set at 5-second intervals and user-settable from 1 to 127-second intervals
Storage	4.4 months of continuous data via 32 MB Flash MMC card (64 MB cards are also available); when full, the wraparound feature replaces oldest data with most recent data

Product brochures

No user reviews available.