An upgrade from the standard SGC, the SCG Plus features a hibernation mode for longer life span. Like the SCG, the SCG Plus offers a portable lightweight single gas monitor in a compact durable package that's entirely maintenance free and still provides a real-time PPM display
Gas Clip Technologies SGC Plus is the only maintenance free single gas detector available with "Hibernate" mode. "Hibernate" mode allows users to place their units in a rested state when not in use. The SGC Plus is perfect for seasonal/turnaround contractors or rental fleets. When your job or turnaround is finished, simply synchronize the instrument with our IR Link or Clip Dock and put the detector in a rested state. When you are ready to use the detector again, simply press the power button to reactivate the detector. With the SGC Plus, you only pay for the time the detector is in use.
Each SGC Plus will last for 24 months of use and comes with a warranty of 24 months of use or 3 years from activation (whichever comes first). However, this mode can only be enabled via IR communication with either the IR Link or Clip Dock accessories (not by a button push), so only authorized personnel can place the units in "hibernate" mode. The SGC Plus also provides the most advanced maintenance free disposable single gas detector on the market. Unlike other disposable single gas detectors, the SGC Plus combines a rugged design and reliability with advanced sensor resolution (0.1 ppm for H2S models). Advanced micro processing capabilities allow for quick unit configuration adjustments to comply with current and future industrial health and safety gas exposure regulations for workers in industrial environments.
Bump Check Reminder: All Single Gas Clip models come standard with the bump check reminder feature. When activated, if the detector has not been bump tested within the designated interval, the instrument will emit both a flash and show "buP" across the screen alerting the user, peer, or supervisor that the gas bump test is due. In addition to the flash, the TEST Icon will continually display in the upper left hand corner. This alert increases user accountability and allows for easier policy enforcement. Note the flash feature can be disabled within the IR Link software, if desired.
Programmable unique 6 digit ID: Considering the rugged environment these instruments are often exposed to and used in, identification via serial number, sticker, or marker can be unreliable. With the unique ID feature, units can be identified with a simple push of a button. Available using both limited alpha and full numeric characters, each unit can be assigned a unique ID utilizing, for example an employee ID number, last 4 digits of SSN, or a job code. Unique ID's will also appear on event log reports and bump test logs. ID's will be displayed on the detector screen in segments of 3 digits at a time (first 3 digits, then last 3 digits).
Adjustable alarm set points: To adapt with changing health and safety gas exposure regulations for workers in industrial environments , the Single Gas Clip alarm set points can be easily adjusted via the IR Link software or through the Clip Dock. Detectors can also be special ordered with custom alarm set points.
|Size||3.2" H x 2.0" W x 1.1" D
(81 mm H x 50 mm W x 28 mm D)
|Weight||2.7 oz. (76 g)|
H2S: -40°C to +50°C/ -40°F to +122°F
CO: -40°C to +50°C/ -40°F to +122°F
O2: -50°C to +50°C/ -58°F to +122°F
|Humidity||5% to 95% non-condensing relative humidity|
|Alarms||Visual, Vibrating and Audible (minimum 95 db)|
|Tests||Full function self-test on activation and every 20 hours; continuous automatic battery and sensor tests|
|Battery Life||Two Years; 4 minutes of alarm per day|
|Ratings||IP 67/ Complies with EMC directives 89/336/EEC|
|Certifications||UL 913 and CSA-22.2 No 157 Class 1 Division 1&2 Groups A, B, C and D; ATEX: II 1 G Ex ia IIC T4; IECEX: Ex ia IIC T4|
|Warranty||3 years from activation; 24 months of operational life (whichever occurs first); 1 year shelf life|
H2S: 0-100 (Low alarm limit: 10 ppm; High alarm limit: 15 ppm)
CO: 0-300 ppm (Low alarm limit: 35 ppm; High alarm limit: 200 ppm)
O2: 0-30% (volume) (Low alarm limit: 19.5%; High alarm limit: 23.5%)
Notes: Real-time gas display or time remaining; adjustable alarm set points and bump check reminder
Small, compact, easy to use and virtually maintenance free. It is the only detector of its kind with "Hibernate" mode, which allows the user to place the detector in a rested state when not in use. This feature is perfect for the seasonal/turnaround contractors and for rental fleets. It also has the best sensor resolution on the market with 0.1 ppm for H2S models. The Real-time gas reading capability is also a unique feature.
The only downside I see with this unit that you have to use the IR Link or the ClipDock to put the unit in Hibernate mode.
An excellent monitor, it is ideal for contract, seasonal and turnaround workers as well as rental fleets. Its features make it one of the best single gas maintenance free units on the market today.
This is probably the most advanced maintenance-free disposable single gas detector on the market today. Combining rugged design, reliability, amazing sensor resolution and the ability to hibernate the unit for downtimes, this detector is fantastic.
It is a good fit in virtually any application as a quick and easy safety device. There is no need for calibration, sensor replacement, battery replacement or battery charging on this model. However, Calibration can be performed on the unit as an option if the user wants to calibrate it and regular maintenance Bump Tests can be performed on the unit depending on personal preference or when site safety regulations require it.
Available models include the SGC-P-H for Hydrogen Sulphide (H2S) and SGC-P-C for Carbon Monoxide (CO). Each SGC Plus will last for 24 months of use and comes with a warranty of 24 months of use or 3 years from activation (whichever comes first).
Other unique features on this detector include the ability to adjust the alarm set points, program it with a 6-digit ID, and allows for quick configuration adjustments to comply with current and future regulations. The built-in concussion proof boot provides excellent protection against accidental bumps, scratches and damage; and it is water-proof, with an IP rating of 67 it can be submerged in water up to 1 m deep for 30 minutes. It is also compatible with the GasClip Technologies Clip Dock calibration and bump test station for those who wish to use a hands-free, automated, bump test and calibration procedure.