Home » Calibration » Calibration Gas Cylinders » BW Gas Alert Clip Extreme 36 Month Gas Detector
BW Gas Alert Clip Extreme 36 Month Gas Detector
- 36 month disposable detector
- Requires no calibration or maintenance
- Simple, convenient one-button operation
- IP66/67 rating for moisture/dust protection
- Built-in event logging stores alarm events
Introducing the new GasAlertClip Extreme 3. Providing Three years of protection from H2S or CO, the water-resistant GasAlertClip Extreme 3 has a built-in concussion-proof boot and is ideal for amphibious operations and high-moisture environments.
Equipped with two alarm levels and an internal vibrator, the GasAlertClip Extreme 3 now features four visual LEDs, and a high-output audible alarm. The large, alphanumeric display provides instant notification of gas alarms, test status, life remaining (months then days then hours) and peak (maximum) exposures encountered.
The GasAlertClip Extreme 3's advanced microprocessor performs a full function self-test automatically on startup and on demand to verify sensor, circuit and battery integrity, as well as audible/visual alarm operation. Each unit also comes with built-in event logging.
Generating a permanent record of gas alarm events has never been easier. The GasAlertClip3 Extreme allows for effortless transmission of stored event data to a cordless printer or a PC for review and analysis.
Despite being loaded with features, the GasAlertClip Extreme 3 is compact and light, which makes it comfortable to wear. Clip it to your lapel, pocket, belt or hardhat for unequalled protection.
Simply press the START/TEST button and the GasAlertClip Extreme 3 is ready to use, providing three years of continuous, maintenance-free operation from the day of activation.
Standard Versions: units come ready for use; complete with integral water-resistant IP 66/67 concussion-proof housing, sensor, stainless steel alligator belt clip, test cap and instructions.
Supported Gases:
Equipped with two alarm levels and an internal vibrator, the GasAlertClip Extreme 3 now features four visual LEDs, and a high-output audible alarm. The large, alphanumeric display provides instant notification of gas alarms, test status, life remaining (months then days then hours) and peak (maximum) exposures encountered.
The GasAlertClip Extreme 3's advanced microprocessor performs a full function self-test automatically on startup and on demand to verify sensor, circuit and battery integrity, as well as audible/visual alarm operation. Each unit also comes with built-in event logging.
Generating a permanent record of gas alarm events has never been easier. The GasAlertClip3 Extreme allows for effortless transmission of stored event data to a cordless printer or a PC for review and analysis.
Despite being loaded with features, the GasAlertClip Extreme 3 is compact and light, which makes it comfortable to wear. Clip it to your lapel, pocket, belt or hardhat for unequalled protection.
Simply press the START/TEST button and the GasAlertClip Extreme 3 is ready to use, providing three years of continuous, maintenance-free operation from the day of activation.
Standard Versions: units come ready for use; complete with integral water-resistant IP 66/67 concussion-proof housing, sensor, stainless steel alligator belt clip, test cap and instructions.
Supported Gases:
|
|
The Good:
The Bad:
The Bottom Line:
The Bad:
The Bottom Line:
Full Review
- Maintenance-free 3 years of protection with no sensor or battery replacement, no calibration, no downtime
- Compact (1.1 x 2.0 x 3.2 in. / 28 x 50 x 81 mm) and lightweight (2.7 oz. / 76 g)
- Built-in concussion-proof boot
- Peak alarm and the time elapsed since the exposure
- Automatic event logging records 10 most recent alarm events that can be downloaded via built-in IR COM port to a printer, computer or MicroDock II docking station module
- 95 dB tone (typical) and bright, quad-LED indication on alarm
- Internal vibrator alarm
- Rugged, IP 66/67 highly water-resistant design
- Full function self-test of audible/visual and vibrator alarms, integrity of sensor, battery and circuitry
- Three year warranty (life of instrument) including sensors
Standard Versions: units come ready for use; complete with integral
water-resistant IP 66/67 concussion-proof housing, sensor, stainless
steel alligator belt clip, test cap and instructions.
| Humidity: | 5% to 95% RH (non-condensing) | |
| EMI/RFI: | Complies with EMC Directive 89/336/EEC | |
| Ingress protection: | IP 66/67 | |
| Battery: | Lithium, non-replaceable | |
| Continuously on: | Yes | |
| One-button control: | Activation, self-test and alarm event data transmission | |
| Full functional self-test: | Verifies integrity of sensor, circuitry, battery and audible/visual alarms | |
| Sensor: | Electrochemical cell (temperature compensated) | |
| Operational life: | Three years | |
| INDICATORS AND ALARMS: | ||
| Visual alarm: | Flashing, wide-angled alarm lens with red quad-LEDs, plus fl ashing ALARM icon | |
| Audible alarm: | Pulsing, high-output siren at 95 dB (typical) at 1 ft. (0.3 m) | |
| Vibrator alarm: | Internal | |
| Failure alarm: | Yes (audible/visual/vibration) | |
| Self-test pass: | Yes (audible/visual/vibration) | |
| Other: | End-of-life (audible/visual/vibration) | |
| CONTINUOUS LCD DISPLAY: | Status display | |
| Life remaining: | Continuously displayed in months, then days, then hours | |
| Two alarm levels: | LOW alarm / HIGH alarm | |
| Peak alarm exposure: | Records and displays peak alarm exposure, and time elapsed (up to 24 hrs.) | |
| Alarm setpoints: | High and low (displayed on demand in ppm) | |
| Self-test status: | Advises to "TEST" and that self-test was passed "u" | |
| TESTS: | ||
| Full function self-test: | On activation and on demand | |
| Battery: | Every two hours (auto) | |
| EVENT LOGGING: | Records and transmits up to 10 gas alarm events | |
| Event information: | Gas type, peak exposure level (ppm or %); alarm duration in minutes and seconds; time elapsed since the alarm occurred in days, hours and minutes, life remaining, serial number, self-tests, cumulative alarm time | |
| Transmission method: | Via infrared port to infrared printer or to an IR DataLink | |
| PHYSICAL SIZE: | ||
| Size: | 1.1 x 2.0 x 3.2 inches / 28 x 50 x 81 mm | |
| Weight: | 2.7 oz. / 76 g | |
Fleet Manager II allows you to conveniently manage your gas detectors.
Data storage and analysis has never been so simple. With the same look and feel as Fleet Manager, Fleet Manager II allows users to download information directly from BW instruments or the MicroDock II.
With improved functionality, users can:
• Automatically create accurate and user-friendly reports
• Easily sort, format and graph data as well as view history
• Archive and share data easily, including databases
• Download and manage calibration and bump check records as well as datalogged information onto any PC
Compatible with:
Data storage and analysis has never been so simple. With the same look and feel as Fleet Manager, Fleet Manager II allows users to download information directly from BW instruments or the MicroDock II.
With improved functionality, users can:
• Automatically create accurate and user-friendly reports
• Easily sort, format and graph data as well as view history
• Archive and share data easily, including databases
• Download and manage calibration and bump check records as well as datalogged information onto any PC
Compatible with:
- GasAlertQuattro
- GasalertMax XT
- GasAlertClip Extreme 24 Month
- GasAlertClip Extreme 36 Month
- GasAlert Extreme
- GasAlertMicro
- GasAlertMicro 5 Series (Micro 5 IR, Micro 5 PID)
- GasAlertMicroClip
- MicroDock II
Product brochures
En español
Product price lists
Product manuals
No user reviews available.
