Simple one button operation minimizes the need for training and gets workers on the job faster. Extended 18 hour battery run time keeps workers safe for longer. Beeping alone while working in a loud environment might not always be enough but with the visible flashing green IntelliFlash™ workers are notified of the dangers. With a new oxygen sensor that extends overall operational life expectancy. Yellow Housing
The easy to wear, slim and compact GasAlertMicroClip X3 provides affordable protection from atmospheric gas hazards and extended battery life, especially in cold weather. The GasAlertMicroClip X3 features visual compliance at a glance with the flashing, green IntelliFlash™. Easy one-button operation reduces training time and lets workers focus on the job at hand. For simple, cost-effective management of your records, calibration and bump testing, choose BW's MicroDock II automatic test and calibration system and Fleet Manager II software.
Meets ACGIH 1 ppm H2S TWA recommendations.
Data storage and analysis has never been so simple. With the same look and feel as Fleet Manager, Fleet Manager II allows users to download information directly from BW instruments or the MicroDock II.
With improved functionality, users can:
|H2S||0 to 100 ppm||1 ppm|
|CO||0 to 500 ppm||1 ppm|
|O2||0 to 30.0%||0.1%|
|Combustible gases||0 to 100% LEL
0 to 5.0% v/v
|Alarm setpoints for all sensors are user adjustable. Setpoints are automatically displayed during instrument start up.|
|Size||4.4 x 2.4 x 1.2 in / 11.3 x 6.0 x 3.1 cm|
|Weight||6.7 oz. / 190 g|
|Temperature||-4 to 122°F / -20 to 50°C|
|Humidity||0% to 95% RH (non-condensing)|
|Alarms||- Visual, vibrating, audible (95 dB)
- Low, high, STEL, TWA, OL (over limit)
|Tests||Audible/visual alarms on activation, sensors, battery and circuitry (continuous)|
|Typical Battery Life||18 hours; recharges in less than 6 hours|
|User Options||Confidence beep
Set STEL interval
Safe display mode
Auto zero on start up
O2 auto calibration on start up
Set bump test interval
Force bump test when overdue
|Ratings||EMI/RFI: Complies with EMC Directive 2004/108/EC IP 66|
|Certifications and Approvals||Class I, Div. 1, Gr. A, B, C, D
ATEX: II 1 G
Ex ia IIC T4 Ga
IECEx: Ex ia IIC T4 Ga
|Warranty||Three-year warranty on Oxygen Sensor, full two-year warranty on all other sensors|
There are many gas detection products on the market that might appear to be the same, but a closer inspection of specification, functionality and features reveals major differences in what products can do and the potential value they can offer. Similarly, individual applications are also unique in their respective designs, needs and processes undertaken.
Before beginning to consider gas detection equipment, a risk assessment needs to be conducted. Any company employing staff has the obligation to conduct risk assessments to identify potential hazards and these can include potential gas, vapor or Oxygen deficiency risks. If gas hazards are identified, gas detection is applicable as a risk reduction method.
Depending on the processes being undertaken and the gases being detected, remote or off-site alarm notification plus event data logging/reporting may also be required for Health and Safety management records. Another factor impacting on the need for enhanced reporting functions might be regulatory compliance or a condition of insurance.
Having identified the primary objective, the suitable equipment is selected by asking a number of key questions. These fall into three broad categories:
The gases to be detected should be identified by the risk assessment, however experienced gas detection equipment manufacturers and their approved distributors are often able to help in this process, based on their experience of similar applications. However, it is important to remember that it is the end-user’s responsibility to identify all potential hazards. It is also essential to identify the potential source of a gas release as this helps determine the number and location of detectors required for a fixed gas detection system.
The performance, accuracy and reliability of any gas detection equipment will be affected by the environmental conditions it is subjected to. Temperature, humidity and pressure levels at the location all have a direct bearing on the type of equipment that should be selected. Additional factors such as potential variations resulting from a production process itself, diurnal/nocturnal fluctuations and seasonal changes may also affect the type of device which is suitable.
The next area of consideration relates to additional product functionality. Aspects like wiring configuration are important, especially when retro-fitting into an existing application. If the apparatus is being integrated into a separate safety system, certain communication protocols may also be required such as HART®, Lonworks or Modbus®. Consideration will also need to be given regarding the requirement for local displays on transmitter units and local configuration of the unit and gas displays may also be a useful addition.
Routine maintenance is another important consideration. Some gases and vapors can be detected with a number of different sensing technologies, e.g. Hydrocarbon gases with catalytic beads or Non-dispersive Infrared NDIR. Catalytic beads do not provide fail-to-safety operation and therefore can require a high frequency of routine maintenance, however NDIR based solutions tend to have a higher initial purchase price, but may require less routine maintenance. In-house resource to undertake such routine maintenance needs to be identified and in the absence of such a resource, budgeting for third party maintenance is an important factor in selecting the right equipment.
If you have questions about any of our gas detection products or services, please don’t hesitate to contact us. Whether you need a hand finding a new product or need help with your current system, just ask our team of Factory Trained Experts.
Click on a category to view a selection of compatible accessories with the BW MCX3-XWHM-Y-NA GasAlertMicroClip X3 Multi-Gas Detector, 4 Gas, %LEL, O2, H2S, CO.